BOS Void 2013



Not Rated Yet.

Brand: BOS
Category: Rear Shocks

Description: Void is the first DH air shock produced by Bos. I may seem surprising for those who know well the company, as it had always upheld the coil spring for DH... so far. | Nevertheless, Bos has already produced air shock. Vip’R is not the first. 10 years ago, Bos made a cross country shock for a big bicycle brand. | And if Bos stayed focused on coil sprig for DH until now, it never made it a matter of principle. Bos always said that when an air spring would reach the same level of performance and reliability than a coil one, then, there would be no reason to avoid producing it. | So, we can guess this is now the case! | | Void is very similar to Stoy RaRe. Both share the same main specs : | Specific setting for the bike Three ways of hydraulic settings Aluminum rod Needle bearing mounting kit | The main difference is the spring, and consequently the absence of hydraulic bump stop ! | The diameter of the air chamber is the same than the diameter of a coil spring, which allows to mount the shock on any bike. | The valve can be oriented frontwards or backwards, without any tool. It can also rotate around the air chamber (the only fordidden place is in front of the reservoir). That way, Void is highly compatible with any bike. | | | Piggy back hydraulic shock Air spring Available length x stroke : 222 x 68 / 240 x75 / 267 x 89 Internal valving specific for each bike | Hydraulic settings : High speed compression Low speed compression Rebound | Pneumatic settings Pressure (spring rate) Volume (progressiveness) | Needle bearing mounting kit weight : 519 g (240 mm) | Hardware : std bushing


There are no reviews submitted for the Void 2013

Your Reviews Ranking

Login to see your reviews ranking.